Service

New battery registration

The gateway learns the new battery: capacity, type and number; wear is counted from zero.

Odyx Pro🔒 SFD activation required

What changes

Module 19, object 2A31: capacity (byte 0), technology (byte 1), manufacturer (bytes 2–4) and serial number (bytes 5–14) of the new battery.

Details

After a battery replacement the gateway has to learn the new one: it sets charging by capacity and technology, and a new serial number restarts the wear count. Without registration the car keeps charging for the old battery's wear and cuts consumers and Start-Stop earlier. Take the data from the new battery's label: capacity in Ah, type (EFB, AGM, flooded), manufacturer code and serial number. Object 2A31 has the same layout on MQB, MQB Evo and MLB Evo; it has not been verified on a car yet — Odyx reads the object back after writing. Fit a battery of the technology the car expects: AGM instead of EFB is fine, EFB instead of AGM is not. On MQB Evo the gateway is SFD-protected. Rollback: write the previous data from the history.

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →