App Store
Service

TPMS reset

The car stores the current pressure as normal — after inflating or changing wheels.

Odyx Pro
Get it on the App Store

What changes

The ABS unit stores the current pressure as the reference — the same as the “SET” button in the menu. Needed after inflating, rotating or replacing wheels.

Details

For indirect pressure monitoring, which derives the pressure from the ABS sensors. Routine 0413 in the ABS unit with access code 20103 (fallback 40168). Takes a few seconds. A direct system with sensors in the wheels is reset from the car's menu.

Before you start

Takes about 1 min.

  • Pressure in all wheels set according to the label on the door pillar
  • Ignition on, car stationary

More in “Service”

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →