App Store
Service

Parking brake: test

The parking brake applies several times and calibrates its force.

Odyx Pro
Get it on the App Store

What changes

The unit applies and releases the calipers several times and calibrates the force. Completes the pad replacement.

Details

Routine 0410 in the ABS unit. Run after “close after pad replacement”. The calipers are applied and released several times; afterwards the parking brake is ready for use again.

Before you start

Takes about 1 min.

  • Service mode closed, calipers and pads in place
  • Ignition on, engine off
  • Parking brake released, pedals not pressed, rear wheels free

More in “Service”

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →