App Store
Instrument cluster

Needle sweep at start

The needles greet the driver with a full sweep.

Odyx Pro
Get it on the App Store

What changes

Module 17: long coding, byte 1, bit 0 = 1 (Staging). The needles sweep the scale when the ignition is switched on.

Details

Needle sweep of the instrument cluster when the ignition is switched on. Map on the long coding of the MQB instrument cluster; if the cluster coding has no such byte, Odyx refuses before writing. Not yet confirmed by a write on an A3 8V. Rollback: the same bit back to 0.

More in “Instrument cluster”

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →