Lighting

Coming Home: flash the high beam

Flash the high beam after switching off and the headlights light the way to the door.

Odyx Pro

What changes

Unit 09: object 0A57, byte 4, bits 4–5 (on a coded unit 0D04, bits 0–1). Coming Home: flash the high beam.

Details

The low beam lights the way after the ignition is switched off. For the manual and automatic modes the map also sets the light duration as in the factory MQB setting. New-BCM map in two variants — the adaptation object (the Polo Plus unit 09 has no long coding) or the older unit's object; Odyx takes the one the unit knows, otherwise nothing is written. Access code 31347. Not yet verified by a write on a Polo Plus: Odyx reads the object first and shows the changes. Revert from the write history.

Other options

This is one option of the “Coming Home” setting: only one can be active.

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →