Lighting

High beam assist memory

No need to switch high beam assist on again every trip.

Odyx Pro

What changes

Module 09: object 0A60, byte 0, bit 4 = 0 (0D0C, byte 1, bit 1 = 0 on a coded module). The high-beam assistant stays on after the ignition is switched off.

Details

Needs high beam assist. New-BCM map in two variants — the adaptation object (the Polo Plus unit 09 has no long coding) or the older unit's object; Odyx takes the one the unit knows, otherwise nothing is written. Access code 31347. Not yet verified by a write on a Polo Plus: Odyx reads the object first and shows the changes. Revert from the write history.

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →