Body

Tear-drop wipe after washing

After washing, the wipers clear the drips by themselves.

Odyx Pro

What changes

Module 09: object 0A72, byte 1, bit 2 = 1 (0D05, byte 7, bit 2 on a coded module) and object 6001, byte 2, bit 5 = 1. A few seconds after washing the wipers make one more sweep.

Details

Needs a rain and light sensor. New-BCM map in two variants — the adaptation object (the Polo Plus unit 09 has no long coding) or the older unit's object; Odyx takes the one the unit knows, otherwise nothing is written. Access code 31347. Not yet verified by a write on a Polo Plus: Odyx reads the object first and shows the changes. Revert from the write history.

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →