Instrument cluster

Needle sweep at start

The needles greet the driver with a full sweep.

Odyx Pro

What changes

Module 17: long coding, byte 1, bit 0 = 1 (Staging). The needles sweep the scale when the ignition is switched on.

Details

The needles sweep the dials when the ignition is switched on. A long-coding bit of instrument cluster 17 — the same layout as MQB clusters, and the Polo Plus coding matches it. Access code 20103. Not yet verified by a write on a Polo Plus: Odyx reads the coding first and shows the changes. Turn off with the same switch.

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →