Lighting

DRL off while flashing the high beam

While you flash the high beam the daytime lights go off, so the flash is easier to notice.

Odyx Pro

What changes

Module 09 (central electrics (BCM)): long coding, byte 12, bit 1 = 1.

Details

Skoda Yeti 5L (2009–2018). Factory daytime running lights are required. The map is based on public Yeti coding descriptions and has not been verified by writing to a car. Odyx reads the module coding first and shows the changes. The Yeti 09 module answers over TP2.0 (KWP2000) — you need an ELM327 adapter that supports TP2.0. Undo — from the write history.

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →