Lighting

Comfort turn signal: 3 flashes

A short tap of the stalk gives three flashes, as from the factory.

Odyx Pro

What changes

Unit 09: object 0A5E, byte 0, bits 1–2 = 01, bit 4 = 1. A light touch of the stalk — the indicator flashes 3 times.

Details

Škoda Rapid second generation (2020–2023). Unit 09 has no long coding, only adaptations: Odyx writes the object of the unit without coding and checks before writing that unit 09 has no long coding; otherwise it refuses before writing. Odyx enters access code 31347 itself. The map has not been verified by writing on a Rapid. Odyx reads the object first and shows the changes. Revert from the write history. If the number of flashes did not change, resetting the lighting settings in the infotainment menu helps; it also resets personal light settings. Odyx does not perform this reset automatically.

Other options

This is one option of the “Comfort turn signal” setting: only one can be active.

Odyx · Owner’s manualHow to use

How to enable it in Odyx

  1. Plug an ELM327 Bluetooth LE adapter into the OBD port (on a Mac also Wi‑Fi, USB or DoIP).
  2. Odyx scans the units, recognises the car and shows what is on and what can be enabled.
  3. Open the feature card: before / after / how to check, and the change plan.
  4. Confirm the write. A backup is made automatically; put it back from the logbook any time.
☑ Engine off
☑ Ignition on
☑ Voltage 12 V or more
☑ Car off the road

Safety rules →